Antennas
Antenna-Railway-2L2WG
Antenna-Railway-4L2WG
Multiband train antenna with antenna cables
Antenna-Railway-2LG
Multiband train antenna with antenna cables
Antenna-Railway-4LG
Antenna-Railway-2L
Antenna-Railway-4L
Multiband train antenna with antenna cables
Antenna-Railway-Indoor-2W
Antenna-Railway-Indoor-4W
Antenna-Railway-Indoor-01-2W
Accessoires
Compliance
EN45545-2
Order Code (0,5 m)
Pwr-Cable-Railway-01-M12-0.5
Order Code (3 m)
Pwr-Cable-Railway-01-M12-3
The kit consists of
- 110/230 V - 24 V (1.25 A, 30 W) PSU international
- 2x digital I/O connector
- 4x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
- 1x Antenna-Roof-2LG
- 7x Antenna adapter TNCm to SMAf
- 1x Ethernet adapter M12 to RJ45
- 1x Ethernet adapter M12 to RJ45 GbE
Indented use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-Int-Railway
Order Code
Con-M12-4Pol-f
Features
2x Controller Area Network V2.0B (ISO 11898)
CAN Signals
CANH, CANL
CAN Signal Level
High > 2.75 V, low < 2.0 V
CAN Bitrate
Up to 1 Mbps
CAN Isolation
1500 VDC, galvanic isolation
CAN Termination
No internal bus termination
Bus access
Passive: read access only
Active: read + write access
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
2Cm - 2x CAN Passive (ready only)
2Cn - 2x CAN Active (read + write)
CmCn - 1x CAN Passive and 1x CAN Active
Features
2x Analog line-in, 2x Analog line-out
Analog Signals
Line in +/-, line out: +/-
Analog Line-In
21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz
Analog Line-Out
600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz
Form Factor
miniPCIe (USB)
Software Support
Voice Gateway (Lic-V) and SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
A
Features
2x digital input
2x digital output
DI Signals
+, -
DI Level
Low: 0 - 5 VDC, high 9 - 60 VDC
DI Isolation
1500 VDC, galvanic isolation
DO Level
0 - 60 VDC/1A
DO Signals
NO, NC, COM
DO Isolation
1500 VDC, relais
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
2D
Features
SSD storage card for application data
Capacity
32 GB, 64 GB, 128 GB, 256 GB, 512 GB, 1 TB
Technology
SSD (Solid State Disk)
Data
Application data such as logs, media content, ...
Form Factor
SATA Disk
Software Support
SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
Da, Db, Dc, Dd, De, Df
Features
1x Analog line-in, 1x Analog line-out
1x Digital-input, 1x Digital-output
Analog Signals
Line in +/-, line out: +/-
Analog Line-In
21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz
Analog Line-Out
600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz
Digital-In Signals
+, -
Digital-In Levels
Low 0 - 5 VDC, high 7.2 - 60 VDC
Digital-Out Signals
NO, COM
Digital-Out Levels
0 - 60 VDC/1A
Digital-Out Isolation
100 VDC
Form Factor
miniPCIe (USB)
Software Support
Voice Gateway (Lic-V) and SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
Ap
Features
GNSS with BeiDou, Galileo, GLONASS, GPS/QZSS
72-channel u-blox M8 engine
3 concurrent GNSS channels
Integrated motion sensors
Dead Reckoning Modes
UDR: Untethered Dead Reckoning (without wheel tick)
ADR: Automotive Dead Reckoning (requires wheel tick)
Antennas
Active or passive
Accuracy
Up to 2.5 m CEP
Sensitivity
Up to –160 dBm
Form Factor
miniPCIe (USB)
Software Support
Supported in NRSW
Product Support
Ask for product support
Order Code
Gd
Features
1x IBIS peripheral device according to VDV 300 (Slave)
1x RS-232 serial interface
IBIS Signals
WBED, WBME, WBSD, WBMS
IBIS Signal Level
High > 5VDC, low < -5 VDC
IBIS Bitrate
1200 bps
IBIS Isolation
1500 VDC, galvanic isolation
RS-232 Signals
TX, RX, CTS, RTS
RS-232 Signal Level
High > 5 VDC, low < -5 VDC
RS-232 Bitrate
Up to 1 Mbps
RS-232 Isolation
1500 VDC, galvanic isolation
Form Factor
miniPCIe (USB)
Software Support
IBIS support on request, RS-232 in NRSW SDK or LXC Container
Product Support
Ask for product support
Order Code
I (IBIS), Sb (RS-232)
Features
1x Controller Area Network V2.0B (ISO 11898),
1x RS-485 serial interface
CAN Signals
CANH, CANL
CAN Signal Level
High > 2.75 V, low < 2.0 V
CAN Bitrate
Up to 1 Mbps
CAN Isolation
1500 VDC, galvanic isolation
CAN Termination
No internal bus termination
CAN Bus access
Active: read + write access
RS-485 Signals
A, B
RS-485 Signal Level
Differential output voltage, loaded 1.5 VDC – 3.6 VDC
RS-485 Bitrate
Up to 460'800 bps
RS-485 Isolation
1500 VDC, galvanic isolation
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
Cn (CAN Active), Sa (RS-485)
4G – LTE
n.a.
3G - DC-HSPA+/UMTS
n.a.
2G - GSM/GPRS
GSM-R (876-880 / 921-925), B8 (900), B3 (1800)
Category
GPRS Multislot class 10
Output Power
GSM-R Power Class 4 (2W)
Antenna ports
SISO
Datarate down / up (max)
85.6 kbps / 42.8 kbps
Voice
GSM (HR/FR/EFR/AMR)
Model
Triorail TRM-5
Form Factor
miniPCIe (USB)
Order Code
Gr
Product Support
Ask for product support
Features
Extends number of OpenVPN clients from 10 to 25 and enables DynDNS server
Product Support
Ask for product support
Order Code
S
Features
Environment supporting LXC container deployment to run customer applications separated from the NRSW (edge computing)
Product Support
Ask for product support
Order Code
Vi
Features
ITxPT specifications S01 v2.0.1 & S02 v2.0.1 with the following services:
- Module inventory service
- Time service
- GNSS Location service (requries -G option)
- FMStoIP service and related sub-services (requries -F option)
- VEHICLEtoIP service (requries -F option)
Product Support
Ask for product support
Order Code
Ix
Compliance
ITxPT hardware compliance can be achieved with appropriate product hardware.
Features
Allows the enhanced WLAN configuration for professionals:
- Frequences
- Antenna gain
- Regulatory domain
Product Support
Ask for product support
Order Code
Rf