Antennas

Antenna-Coach-2W

Antenna-Coach-2W

0 x Cellular 2 x WLAN 0 x GNSS
Antenna-Coach-Indoor-2W

Antenna-Coach-Indoor-2W

0 x Cellular 2 x WLAN 0 x GNSS
Antenna-Coach-4N4WG

Antenna-Coach-4N4WG

4 x Cellular 4 x WLAN 1 x GNSS
Antenna-Coach-4N4W

Antenna-Coach-4N4W

4 x Cellular 4 x WLAN 0 x GNSS

Accessoires

The kit consists of

  • 110/230 V to 24 V (1.25 A, 30W ) PSU International for Ignition Sense Input with 5 mm pitch
  • 3x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
  • 3x Adapter FAKRA-f-SMA-f

Intended use

Intended for laboratory and test purposes only

Order Code

Accessory-Starter-Kit-Int-IGN

Input

110/230 V

Output

24 V

Current

1.25 A

Power

30 W

Connector

5 mm pitch, 3 positions

Order Code

Power-Supply-Int-24V-IGN

Features

2x Controller Area Network V2.0B (ISO 11898)

CAN Signals

CANH, CANL

CAN Signal Level

High > 2.75 V, low < 2.0 V

CAN Bitrate

Up to 1 Mbps

CAN Isolation

1500 VDC, galvanic isolation

CAN Termination

No internal bus termination

Bus access

Passive: read access only
Active: read + write access

Form Factor

miniPCIe (USB)

Software Support

NRSW via SDK or LXC Container

Product Support

Ask for product support

Order Code

2Cm - 2x CAN Passive (ready only)
2Cn - 2x CAN Active (read + write)
CmCn - 1x CAN Passive and 1x CAN Active

Features

2x Analog line-in, 2x Analog line-out

Analog Signals

Line in +/-, line out: +/-

Analog Line-In

21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz

Analog Line-Out

600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz

Form Factor

miniPCIe (USB)

Software Support

Voice Gateway (Lic-V) and SDK in NRSW or LXC Container

Product Support

Ask for product support

Order Code

A

Features

2x digital input

2x digital output

DI Signals

+, -

DI Level

Low: 0 - 5 VDC, high 9 - 60 VDC

DI Isolation

1500 VDC, galvanic isolation

DO Level

0 - 60 VDC/1A

DO Signals

NO, NC, COM

DO Isolation

1500 VDC, relais

Form Factor

miniPCIe (USB)

Software Support

NRSW via SDK or LXC Container

Product Support

Ask for product support

Order Code

2D

Features

SSD storage card for application data

Capacity

32 GB, 64 GB, 128 GB, 256 GB, 512 GB, 1 TB

Technology

SSD (Solid State Disk)

Data

Application data such as logs, media content, ...

Form Factor

SATA Disk

Software Support

SDK in NRSW or LXC Container

Product Support

Ask for product support

Order Code

Da, Db, Dc, Dd, De, Df

Features

1x Analog line-in, 1x Analog line-out

1x Digital-input, 1x Digital-output

Analog Signals

Line in +/-, line out: +/-

Analog Line-In

21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz

Analog Line-Out

600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz

Digital-In Signals

+, -

Digital-In Levels

Low 0 - 5 VDC, high 7.2 - 60 VDC

Digital-Out Signals

NO, COM

Digital-Out Levels

0 - 60 VDC/1A

Digital-Out Isolation

100 VDC

Form Factor

miniPCIe (USB)

Software Support

Voice Gateway (Lic-V) and SDK in NRSW or LXC Container

Product Support

Ask for product support

Order Code

Ap

Features

GNSS with BeiDou, Galileo, GLONASS, GPS/QZSS

72-channel u-blox M8 engine

3 concurrent GNSS channels

Integrated motion sensors

Dead Reckoning Modes

UDR: Untethered Dead Reckoning (without wheel tick)

ADR: Automotive Dead Reckoning (requires wheel tick)

Antennas

Active or passive

Accuracy

Up to 2.5 m CEP

Sensitivity

Up to –160 dBm

Form Factor

miniPCIe (USB)

Software Support

Supported in NRSW

Product Support

Ask for product support

Order Code

Gd

Features

1x IBIS peripheral device according to VDV 300 (Slave)

1x RS-232 serial interface

IBIS Signals

WBED, WBME, WBSD, WBMS

IBIS Signal Level

High > 5VDC, low < -5 VDC

IBIS Bitrate

1200 bps

IBIS Isolation

1500 VDC, galvanic isolation

RS-232 Signals

TX, RX, CTS, RTS

RS-232 Signal Level

High > 5 VDC, low < -5 VDC

RS-232 Bitrate

Up to 1 Mbps

RS-232 Isolation

1500 VDC, galvanic isolation

Form Factor

miniPCIe (USB)

Software Support

IBIS support on request, RS-232 in NRSW SDK or LXC Container

Product Support

Ask for product support

Order Code

I (IBIS), Sb (RS-232)

Features

1x Controller Area Network V2.0B (ISO 11898),

1x RS-485 serial interface

CAN Signals

CANH, CANL

CAN Signal Level

High > 2.75 V, low < 2.0 V

CAN Bitrate

Up to 1 Mbps

CAN Isolation

1500 VDC, galvanic isolation

CAN Termination

No internal bus termination

CAN Bus access

Active: read + write access

RS-485 Signals

A, B

RS-485 Signal Level

Differential output voltage, loaded 1.5 VDC – 3.6 VDC

RS-485 Bitrate

Up to 460'800 bps

RS-485 Isolation

1500 VDC, galvanic isolation

Form Factor

miniPCIe (USB)

Software Support

NRSW via SDK or LXC Container

Product Support

Ask for product support

Order Code

Cn (CAN Active), Sa (RS-485)

Wireless standard

IEEE 802.11a/b/g/n/ac (Wi-Fi 5)

Frequency

2.4/5 GHz

Diversity

2x2 MIMO

Datarate (max)

300 Mbps (2.4 GHz) / 866 Mbps (5 GHz)

Modes

Station or access point (up to 100 clients)

Model

Compex WLE600VX

Form Factor

miniPCIe (PCIe)

Order Code

Wac

Product Support

Ask for product support

Features

Extends number of OpenVPN clients from 10 to 25 and enables DynDNS server

Product Support

Ask for product support

Order Code

S

Features

Versatile voice gateway for seamless call routing

Routes 2G/3G/4G, POTS, VoIP and PTT calls (if supported by hardware)

Number Voice Channels

Up to 4 voice channels, depending on the product type.

Comment: each circuit switched call requires a modem

Product Support

Ask for prodcut support

Order Code

V

Features

Environment supporting LXC container deployment to run customer applications separated from the NRSW (edge computing)

Product Support

Ask for product support

Order Code

Vi

Features

ITxPT specifications S01 v2.0.1 & S02 v2.0.1 with the following services:

  • Module inventory service
  • Time service
  • GNSS Location service (requries -G option)
  • FMStoIP service and related sub-services (requries -F option)
  • VEHICLEtoIP service (requries -F option)

Product Support

Ask for product support

Order Code

Ix

Compliance

ITxPT hardware compliance can be achieved with appropriate product hardware.

Features

Allows the enhanced WLAN configuration for professionals:

  • Frequences
  • Antenna gain
  • Regulatory domain

Product Support

Ask for product support

Order Code

Rf

Features

Remote eUICC SIM profile update with static profile management. According to the remote subscriber provisioning standardized by GSMA in SGP.21 and 22 and validated according to SGP.23.

Product Support

Ask for product support

Order Code

Se

Prerequisite

Use of an eUICC compatible SIM card or a product with a built-in eSIM chip (e.g. NG800).