Mobile / Cellular

Standard

4G – LTE B1 (2100), B3 (1800), B5 (850), B7 (2600), B8 (900), B20 (800)
3G - DC-HSPA+/UMTS B1 (2100), B2 (1900), B5 (850), B8 (900)
2G - GSM/GPRS/EDGE B2 (1900), B3 (1800), B5 (850), B8 (900)
Category LTE Cat 4
Antenna ports 2x2 MIMO
Data rate down / up (max) 150 Mbps / 50 Mbps
Voice CSFB (with optional Software License)
FCC ID XPYTOBYL210
Region

Connectors

SIM

Ethernet

Standard

Ethernet standard 100BASE-TX, Auto MDIX
Speed 10/100 Mbps
Connector

USB

Standard

Connector

Serial, Fieldbus

Protocol

Protocol EIA-232
Signals TX, RX
Signal level High > 5 VDC, low < -5 VDC
Bit rate Up to 115 200 Bit/s

Protocol EIA-232
Signals TX, RX
Signal level High > 5 VDC, low < -5 VDC 
Bit rate Up to 115'200 Bit/s
Protocol EIA-485
Signals A, B
Signal level Differential output voltage, loaded 1.5 VDC – 3.6 VDC 
Bit rate Up to 115'200 Bit/s
Termination 120 Ω for RS-485 configurable by software
Connector

IOs

Type

Signals 1x DI, 1x DO
DI signals +, -
DI level Low: 0 - 3 VDC, high: 9 - 32 VDC
DO signals Relay outputs with NO, NC, COM (normally open, normally closed)
DO level 0 - 32 VDC/1A
Isolation 1'500 VDC

Signals 1x DI, 1x DO
DI signals +, -
DI level Low: 0 - 3 VDC, high: 9 - 32 VDC
DO signals Relay outputs with NO, NC, COM (normally open, normally closed)
DO level 0 - 32 VDC/1A
Isolation 1'500 VDC
Module COM-I/O shield
Connector

System

Core

600 MHz (HW Rev. A) or 1 GHz (HW Rev. B02) single core, 512 MB RAM, 4 GB flash

Module Slots

Software

Features

Package The standard software package includes an intuitive user interface, covering all modern routing protocols and enables efficient mass deployment.
General Fail-safe update (FOTA), upgrade via USB, HTTP(S), (S)FTP or TFTP, remote CLI & WebGUI, RADIUS authentication, Simple Certificate Enrollment Protocol (SCEP), Hardware- und Software Watchdog
Remote Management Manage and monitor devices with SNMP V1/V2/V3, Netmodule vendor MIB, telnet, SSH, or HTTP/HTTPS
Cellular Networking Multi-SIM / eSIM support (optional license), multi-APN support, signal strength monitoring, dedicated bearers, CSFB/VoLTE calls (optional license)
Wireless LAN Access Point, Client Mode, Mesh Point or Dual Modes (Mesh Access Point / Access Point - Client), WLAN Pseudo-Bridge Client Mode: Multiple Client SSID Profile, Encryption: Open, WEP, WPA1/2/3-Personal, WPA1/2/3-Enterprise. Fast Roaming: Fast BSS Transition (802.11r), PreAuthentication, Protected Management Frames (802.11w) AP Mode: Multi-SSIDs (up to 8) Encryption: Open WPA1/2/3-Personal, WPA1/2/3-Enterprise Fast Roaming: Fast BSS Transition (802.11r), PreAuthentication, DFS support Protected Management Frames (802.11w) Client Tracking, Band Steering, Hide SSID broadcasting, Isolate Clients, Accounting, Short guard Intervall Mesh Mode (802.11s): Encryption: None, SAE. Gateway announcements
Link Management Link prioritization, link aggregation, load balancing, multipath-TCP, IP-passthrough, link supervision,
Services DHCP Client/Server, DNS Caching Server, Email, SMS Service, NTP Client/Server, SNTP Server, DynDNS, SSH Server, SNMP Agent, HTTP/HTTPS/FTP Server, IPv6 for WAN, 802.1x over Ethernet, MQTT Broker Voice Gateway (SIP, Call Routing, Audio with optional license) Coovachilli Hotspot
Routing Destination, policy, multipath, mobile-IP, OSPF, BGP, multicast, TCP-MSS clamping, bridging discovery protocols LLDP, CDP, SONMP, EDP, FDP, IRDP, VRRP, STP/RSTP, VRRP, VLAN, PPPoE, VXLAN
VPN OpenVPN, IPsec (IKEv1 and IKEv2), PPTP, GRE, L2TP, CSD dial-in, Certificate revocation service
Firewall Stateful firewall, connection tracking, NAT, NAPT, masquerading, bridge filtering, Adress translation (based on SRC and DST ports)
Encryption supporting password protected PKCS12 files, integrated random certificate key generator, "Let's encrypt" certificate, ECC (Certificates with Elliptic Cryptography)
Quality of Service Diffserv, SFQ, HTB, Priority-based Queuing, Netflow (Softflow)
Programmability SDK
Troubleshooting Logging, Ping, Traceroute, Tcpdump, Speed-test

Power

Input Voltage

Nominal voltages 12, 24 VDC
Absolute voltages 12 VDC to 24 VDC (-20 % / +20 %) 
Connector

Consumption

7 W (average), 10 W (max)

Other

Mounting

Dimensions

Width 45 mm x height 124/134 mm x depth 110/121 mm

Weight

450 g

Environment
Operating Temperature -40°C to +70°C
Ingress Protection Level IP40
MTBF

300’000 h / 34.2 years, according SN29500 at environmental temperature 40 °C

Scope of delivery

Device, General safety instructions, Terminal block

Order Code

NB1601-LSc

Certifications

Compliance

CE according to 2014/53/EU (RED); UKCA according to Radio Equipment Regulations 2017 No. 1206 (RER); UL/IEC/EN 62368-1; 2011/65/EU (RoHS)

Domain

Industrial