Cables & Connectors
Description
This adapter cable provides access to the various interfaces available on the Molex CMC48 connector of the NG800. The purpose of the cable is to facilitate easy commissioning of the product, it is not meant to be used in permanent installations.
Connectors
1x Power 4mm/Banana Connector
1x Fast Ethernet RJ45
1x Console USB
2x CAN D-Sub 9 female
2x BroadR RCY
Order Code
Adapter-CMC48-01
Order Code
Adapter-FAKRAf-SMAf
Order Code
Adapter-SMAm-FAKRAm
Order Code
Con-M12-4Pol-f
Compliance
EN45545-2
Order Code (0,5 m)
Pwr-Cable-Railway-01-M12-0.5
Order Code (3 m)
Pwr-Cable-Railway-01-M12-3
Power Supplies
Input
230 V
Output
12 V
Connector
5 mm pitch, 2 positions
Order code
Power-Supply
Input
230 V
Output
12 V
Connector
3.5 mm pitch, 2 positions
Order Code
Power-Supply-3.5P
Input
110/230 V
Output
24 V
Current
1.25 A
Power
30 W
Connector
3.5 mm pitch, 2 positions
Order Code
Power-Supply-Int-24V-3.5P
Input
110/230 V
Output
24 V
Current
1.25 A
Power
30 W
Connector
5 mm pitch, 3 positions
Order Code
Power-Supply-Int-24V-IGN
Kits (Bundles)
The kit consists of
- 230 V to 12 V (1.5 A, 18 W) power supply unit with 5 mm pitch for EU/CH
- 2x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
Intended use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit
The kit consists of
- 230 V to 12 V (1.5 A, 18 W) power supply unit for EU/CH with 3.5 mm pitch
- 2x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
Intended use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-3.5P
The kit consists of
- 110/230 V to 24 V (1.25 A, 30 W) PSU International with 5 mm pitch
- 2x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
Intended use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-Int
The kit consists of
- 110/230 V to 24 V (1.25 A, 30 W) PSU International with 3.5 mm pitch
- 2x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
Intended use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-Int-3.5P
The kit consists of
- 110/230 V to 24 V (1.25 A, 30W ) PSU International for Ignition Sense Input with 5 mm pitch
- 3x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
- 3x Adapter FAKRA-f-SMA-f
Intended use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-Int-IGN
The kit consists of
- 110/230 V - 24 V (1.25 A, 30 W) PSU international
- 2x digital I/O connector
- 4x Antenna-Port-N (5G, LTE, UMTS, GSM and WLAN)
- 1x Antenna-Roof-2LG
- 7x Antenna adapter TNCm to SMAf
- 1x Ethernet adapter M12 to RJ45
- 1x Ethernet adapter M12 to RJ45 GbE
Indented use
Intended for laboratory and test purposes only
Order Code
Accessory-Starter-Kit-Int-Railway
Licenses
Features
Enables the automatic translation of CAN messages into IP datagrams according to FMS Standard. ITxPT services:
- FMStoIP
- VEHICLEtoIP
Product Support
Ask for product support
Order Code
F
Features
GNSS location service with Server with JSON-, NMEA stream (if supported by hardware)
Product Support
Ask for product support
Order Code
G
Features
ITxPT specifications S01 v2.0.1 & S02 v2.0.1 with the following services:
- Module inventory service
- Time service
- GNSS Location service (requries -G option)
- FMStoIP service and related sub-services (requries -F option)
- VEHICLEtoIP service (requries -F option)
Product Support
Ask for product support
Order Code
Ix
Compliance
ITxPT hardware compliance can be achieved with appropriate product hardware.
Features
Allows the enhanced WLAN configuration for professionals:
- Frequences
- Antenna gain
- Regulatory domain
Product Support
Ask for product support
Order Code
Rf
Features
Extends number of OpenVPN clients from 10 to 25 and enables DynDNS server
Product Support
Ask for product support
Order Code
S
Features
Remote eUICC SIM profile update with static profile management. According to the remote subscriber provisioning standardized by GSMA in SGP.21 and 22 and validated according to SGP.23.
Product Support
Ask for product support
Order Code
Se
Prerequisite
Use of an eUICC compatible SIM card or a product with a built-in eSIM chip (e.g. NG800).
Features
Versatile voice gateway for seamless call routing
Routes 2G/3G/4G, POTS, VoIP and PTT calls (if supported by hardware)
Number Voice Channels
Up to 4 voice channels, depending on the product type.
Comment: each circuit switched call requires a modem
Product Support
Ask for prodcut support
Order Code
V
Features
Environment supporting LXC container deployment to run customer applications separated from the NRSW (edge computing)
Product Support
Ask for product support
Order Code
Vi
Approvals
Label
Declares the product E-Mark approval according to UN ECE R10
Product Support
Ask for product support
Order Code
E
Cellular & WLAN
3G - DC-HSPA+/UMTS
B1, B2, B3, B4, B5, B6, B8, B9, B19
2014/53/EU (RED): B1 (2100), B3 (1800), B8 (900)
4G – LTE-A Pro
B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29DL, B30, B32, B34, B38, B39, B40, B41, B42, B43*, B46(LAA), B48(CRS), B66, B71
2014/53/EU (RED): B1, B3, B7, B8, B20, B28, B38, B40
5G - NR
n1, n2, n3, n5, n7, n8, n12*, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79
2014/53/EU (RED): n1, n3, n7, n8, n20, n28, n38, n40, n77, n78
Category
5G/4G Rel. 15 LTE Cat. 20
Antenna ports
4x4 MIMO
Datarate down / up (max)
5.5 Gbps / 2.7 Gbps
Voice
-
Model
Telit FN980
Form Factor
M2 (with miniPCIe adapter)
Order Code
N
Product Support
Ask for product support
*
future module firmware release
4G – LTE
B1, B3, B7, B8, B20, B28A
3G - DC-HSPA+/UMTS
B1 (2100), B3 (1800), B8 (900)
2G - GSM/GPRS/EDGE
B3 (1800) B8 (900)
Category
LTE Cat 4
Antenna ports
2x2 MIMO
Datarate down / up (max)
150 Mbps / 50 Mbps
Voice
CSFB, VoLTE
Model
Telit LE910C4-EU
Form Factor
miniPCIe (USB)
Order Code
L
Product Support
Ask for product support
4G – LTE Advanced Pro
B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26,
B28, B29, B30, B38, B39, B40, B41, B42, B43, B48 (CBRS), B66, B71
2014/53/EU (RED): B1, B3, B7, B8, B20, B28, B38, B40
3G - DC-HSPA+/UMTS
B1, B2, B4, B5, B6, B8, B9, B19
2014/53/EU (RED): B1, B8
Category
LTE Cat 12
Antenna ports
2x2 MIMO
Datarate down / up (max)
600 Mbps / 150 Mbps
Voice
-
Model
Telit LN920A12-WW
Form Factor
M.2 (with miniPCIe adapter)
Order Code
Lp
Product Support
Ask for product support
4G – LTE
n.a.
3G - DC-HSPA+/UMTS
n.a.
2G - GSM/GPRS
GSM-R (876-880 / 921-925), B8 (900), B3 (1800)
Category
GPRS Multislot class 10
Output Power
GSM-R Power Class 4 (2W)
Antenna ports
SISO
Datarate down / up (max)
85.6 kbps / 42.8 kbps
Voice
GSM (HR/FR/EFR/AMR)
Model
Triorail TRM-5
Form Factor
miniPCIe (USB)
Order Code
Gr
Product Support
Ask for product support
Wireless standard
IEEE 802.11a/b/g/n (Wi-Fi 4)
Frequency
2.4/5 GHz
Diversity
2x2 MIMO
Datarate (max)
300 Mbps
Modes
Station or access point (up to 100 clients)
Model
Compex WLE200NX
Form Factor
miniPCIe (PCIe)
Order Code
W
Product Support
Ask for product support
Wireless standard
IEEE 802.11a/b/g/n/ac (Wi-Fi 5)
Frequency
2.4/5 GHz
Diversity
2x2 MIMO
Datarate (max)
300 Mbps (2.4 GHz) / 866 Mbps (5 GHz)
Modes
Station or access point (up to 100 clients)
Model
Compex WLE600VX
Form Factor
miniPCIe (PCIe)
Order Code
Wac
Product Support
Ask for product support
Modules
Features
2x Analog line-in, 2x Analog line-out
Analog Signals
Line in +/-, line out: +/-
Analog Line-In
21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz
Analog Line-Out
600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz
Form Factor
miniPCIe (USB)
Software Support
Voice Gateway (Lic-V) and SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
A
Features
2x Controller Area Network V2.0B (ISO 11898)
CAN Signals
CANH, CANL
CAN Signal Level
High > 2.75 V, low < 2.0 V
CAN Bitrate
Up to 1 Mbps
CAN Isolation
1500 VDC, galvanic isolation
CAN Termination
No internal bus termination
Bus access
Passive: read access only
Active: read + write access
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
2Cm - 2x CAN Passive (ready only)
2Cn - 2x CAN Active (read + write)
CmCn - 1x CAN Passive and 1x CAN Active
Features
1x Controller Area Network V2.0B (ISO 11898),
1x RS-485 serial interface
CAN Signals
CANH, CANL
CAN Signal Level
High > 2.75 V, low < 2.0 V
CAN Bitrate
Up to 1 Mbps
CAN Isolation
1500 VDC, galvanic isolation
CAN Termination
No internal bus termination
CAN Bus access
Active: read + write access
RS-485 Signals
A, B
RS-485 Signal Level
Differential output voltage, loaded 1.5 VDC – 3.6 VDC
RS-485 Bitrate
Up to 460'800 bps
RS-485 Isolation
1500 VDC, galvanic isolation
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
Cn (CAN Active), Sa (RS-485)
Features
2x digital input
2x digital output
DI Signals
+, -
DI Level
Low: 0 - 5 VDC, high 9 - 60 VDC
DI Isolation
1500 VDC, galvanic isolation
DO Level
0 - 60 VDC/1A
DO Signals
NO, NC, COM
DO Isolation
1500 VDC, relais
Form Factor
miniPCIe (USB)
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
2D
Features
GNSS with BeiDou, Galileo, GLONASS, GPS/QZSS
72-channel u-blox M8 engine
3 concurrent GNSS channels
Integrated motion sensors
Dead Reckoning Modes
UDR: Untethered Dead Reckoning (without wheel tick)
ADR: Automotive Dead Reckoning (requires wheel tick)
Antennas
Active or passive
Accuracy
Up to 2.5 m CEP
Sensitivity
Up to –160 dBm
Form Factor
miniPCIe (USB)
Software Support
Supported in NRSW
Product Support
Ask for product support
Order Code
Gd
Features
1x IBIS peripheral device according to VDV 300 (Slave)
1x RS-232 serial interface
IBIS Signals
WBED, WBME, WBSD, WBMS
IBIS Signal Level
High > 5VDC, low < -5 VDC
IBIS Bitrate
1200 bps
IBIS Isolation
1500 VDC, galvanic isolation
RS-232 Signals
TX, RX, CTS, RTS
RS-232 Signal Level
High > 5 VDC, low < -5 VDC
RS-232 Bitrate
Up to 1 Mbps
RS-232 Isolation
1500 VDC, galvanic isolation
Form Factor
miniPCIe (USB)
Software Support
IBIS support on request, RS-232 in NRSW SDK or LXC Container
Product Support
Ask for product support
Order Code
I (IBIS), Sb (RS-232)
Features
1x Analog line-in, 1x Analog line-out
1x Digital-input, 1x Digital-output
Analog Signals
Line in +/-, line out: +/-
Analog Line-In
21 kΩ, signal level 1.9 Vpp, 100 Hz- 15 kHz
Analog Line-Out
600 Ω, signal level 3.6 Vpp, 300 Hz- 4 kHz
Digital-In Signals
+, -
Digital-In Levels
Low 0 - 5 VDC, high 7.2 - 60 VDC
Digital-Out Signals
NO, COM
Digital-Out Levels
0 - 60 VDC/1A
Digital-Out Isolation
100 VDC
Form Factor
miniPCIe (USB)
Software Support
Voice Gateway (Lic-V) and SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
Ap
Features
SSD storage card for application data
Capacity
32 GB, 64 GB, 128 GB, 256 GB, 512 GB, 1 TB
Technology
SSD (Solid State Disk)
Data
Application data such as logs, media content, ...
Form Factor
SATA Disk
Software Support
SDK in NRSW or LXC Container
Product Support
Ask for product support
Order Code
Da, Db, Dc, Dd, De, Df
Features
2x Controller Area Network V2.0B (ISO 11898)
CAN Signals
CANH, CANL
CAN Signal Level
High > 2.75 V, low < 2.0 V
CAN Bitrate
Up to 1 Mbps
CAN Termination
No internal bus termination
On request: 120 Ω configurable by software
Bus access
Passive (read access only)
On request: write access
Form Factor
Shield
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Order Code
2C
Features
1x RS-232/485
1x digital input
1x digital output
RS-232 Signals
TX, RX
RS-232 Signal Level
High > 5 VDC, low < -5 VDC
RS-232 Bitrate
Up to 1 Mbps
RS-485 Signals
A, B
RS-485 Signal Level
Differential output voltage, loaded 1.5 VDC – 3.6 VDC
RS-485 Bitrate
Up to 1 Mbps
RS-485 Termination
120 Ω for RS-485 configurable by software
DI Signals
+, -
DI Level
Low: 0 - 3 VDC, high: 9 - 32 VDC
DO Signals
NO, NC, COM
DO Level
0 - 32 VDC/1A
DIO Isolation
1500 VAC
Order Code
Sc
Form Factor
Shield
Software Support
NRSW via SDK or LXC Container
Product Support
Ask for product support
Mounting
Order Code
DIN-Rail-Mounting-Clip
Order Code
DIN-Rail-Mounting-Kit